Housing & Economic Signals
How Mortgage Rates Are Determined: Why the Fed Rate Is Not Your Mortgage Rate
The Fed influences mortgage rates but does not directly set them. This guide explains how Treasury yields, mortgage-backed securities, changing spreads, lender economics and borrower-specific factors shape the 30-year mortgage rate.
Freddie Mac 30-year fixed-rate average
7.24%
Week ending October 29, 2026
A national weekly average under Freddie Mac's methodology — not every borrower's quote.
Source: Freddie Mac, Primary Mortgage Market Survey
In late October 2026, three widely watched interest rates sat at very different levels:
- The Federal Reserve held its target range for the federal funds rate at 3.75%–4.00% at its October 28 meeting.
- The 10-year Treasury yield was 4.98% on October 29.
- Freddie Mac's Primary Mortgage Market Survey (PMMS) reported a 30-year fixed mortgage average of 7.24% for the week ending October 29.
If the Fed "controls interest rates," why are these numbers so far apart?
The short answer: the Federal Reserve influences the interest-rate environment, but it does not directly set 30-year mortgage rates. A 30-year mortgage rate is shaped mainly in longer-term bond and mortgage markets. Long-term Treasury yields, the pricing of mortgage-backed securities, mortgage spreads, lender economics and borrower-specific factors all contribute to the rate a borrower is quoted.
This article explains how mortgage rates are determined, why the Fed's rate is not your mortgage rate, and what one widely cited national mortgage-rate number actually measures. It is an explainer, not a forecast: it does not predict where rates or Fed policy are headed, and it does not tell anyone whether to buy, refinance, lock or wait.
What Is a Mortgage Rate?
A mortgage rate is the interest rate charged on the money borrowed to buy a home. The Consumer Financial Protection Bureau (CFPB) describes the interest rate as the cost you pay each year to borrow the money, expressed as a percentage.
Three related numbers are easy to blur together:
- The mortgage interest rate is the rate applied to the loan balance.
- The monthly payment is what the borrower actually pays each month. For a fixed-rate loan it includes principal and interest, and it often also includes amounts for property taxes and insurance collected by the servicer.
- The annual percentage rate (APR) is a broader measure of borrowing cost that also reflects points, broker fees and other charges paid to get the loan. It is covered in its own section below.
This article focuses on the interest rate itself and, in particular, on the 30-year fixed rate that Freddie Mac reports each week.
The Fed Does Not Set Your 30-Year Mortgage Rate
The two rates people most often connect, the federal funds rate and the 30-year mortgage rate, describe very different kinds of borrowing.
The federal funds rate
The federal funds rate is a short-term, overnight rate: the rate at which banks lend reserves to one another. The Federal Open Market Committee (FOMC) sets a target range for it, and changes to that target first affect other short-term rates. On October 28, 2026, the FOMC voted to maintain the target range at 3.75%–4.00%.
The 30-year mortgage rate
A 30-year fixed mortgage is a long-duration loan. The rate on it is set by lenders and shaped mainly in long-term financial markets, through Treasury yields and the market for mortgage-backed securities. As the Federal Reserve Bank of St. Louis puts it, mortgage rates are determined in long-term financial markets.
How the Fed still matters
The Fed's influence on mortgage rates is real but indirect. Its policy decisions, its communications about future policy and its balance-sheet actions affect market expectations about future short-term rates, inflation and financial conditions. Those expectations feed into long-term yields, and from there into mortgage rates.
What the Fed does not do is announce, "Today's 30-year mortgage rate is X%." No such number is set by policy. The mortgage rate a borrower sees is the end of a longer chain.
3.75%–4.00%
Federal funds target
Short-term overnight policy target.
4.98%
10-year Treasury
Long-term government bond yield.
7.24%
Freddie Mac PMMS
National weekly 30-year mortgage-rate average.
Three different rates measuring different things. Not a step-by-step formula.
Why Longer-Term Treasury Yields Matter
Longer-term Treasury yields, commonly represented by the 10-year Treasury, serve as an important benchmark for mortgage rates. Both Fannie Mae and the St. Louis Fed describe the 10-year Treasury note as the benchmark for the 30-year mortgage rate.
Why a 10-year bond for a 30-year loan?
The contract runs for 30 years, but few mortgages last that long. Borrowers sell and move, refinance, pay down their loans early or otherwise end the mortgage before its term is up. Fannie Mae notes that the average mortgage duration is generally considered to be 7 to 10 years, which is closer to the life of a 10-year Treasury than a 30-year one.
A benchmark, not a formula
The relationship is close but not one-to-one:
- Other maturities matter too. Fannie Mae notes that mortgage-market participants use a blend of 5-, 7- and 10-year Treasury notes. The 10-year is the convenient shorthand, not the only reference point.
- The gap between the two can change. Mortgage rates sit above Treasury yields by a spread that widens and narrows over time (explained below). The two can move by different amounts, and occasionally in different directions, over short periods.
- Treasuries are a benchmark for the market, not for one loan. The yield says something about the funding environment for mortgages in general. It says nothing about any individual borrower's quote.
The 10-year Treasury yield is one of the national indicators worth reading alongside mortgage rates.
What Moves the 10-Year Treasury?
A long-term Treasury yield reflects what investors expect over the life of the bond, plus compensation for the risks of holding it. Several forces can push it up or down:
- Expected inflation. Fannie Mae notes that if investors expect higher inflation, they demand higher interest rates as compensation.
- Expected economic growth. Weaker growth expectations can push investors toward Treasuries as a safe haven, which tends to lower yields. Stronger expectations can do the opposite.
- Expected future Fed policy. Long-term rates reflect investors' expectations for short-term rates over the life of the bond, so what markets expect the Fed to do later matters, not only where the target sits today.
- Term premium. This is the extra yield investors require to hold a long-term bond instead of rolling over a series of shorter ones. It is not directly observable. It has to be estimated, and estimates differ.
- Fiscal and Treasury-supply conditions. Expectations about government borrowing and the supply of Treasury securities are often cited as one possible influence on long-term yields, including through the term premium.
- Investor demand and market conditions. Demand from domestic and foreign investors, liquidity and risk sentiment can all affect the price of Treasuries and therefore their yield.
No fixed weights
There is no stable formula that assigns each factor a fixed share of the yield. The factors overlap, interact and change in importance over time. Markets price them continuously, which is why long-term yields, and the mortgage rates benchmarked to them, can move on any trading day: before a Fed meeting, after one, or with no Fed action at all.
These factors overlap and interact. No fixed formula assigns each one a set share of the yield.
How Treasury Yields Become Mortgage Rates
A useful way to picture the process is as a chain of markets, each adding its own layer:
Inflation, growth and policy expectations → long-term Treasury yields → mortgage-backed securities pricing → mortgage spreads and lender economics → the mortgage rate offered to a borrower
- Expectations. Investors form views on inflation, growth and future Fed policy.
- Treasury yields. Those views, along with the term premium and demand for Treasuries, are reflected in long-term government bond yields.
- Mortgage-backed securities. Many U.S. mortgages are pooled into mortgage-backed securities (MBS) and sold to investors. MBS investors compare these securities with Treasuries and require additional yield for the extra risks they carry.
- Spreads and lender economics. Lenders price new loans off what they can earn by selling them into the MBS market, plus their own costs and margins.
- The borrower's rate. The rate a specific borrower is offered then depends on the loan and the borrower's profile.
This is a conceptual chain, not a fixed mathematical formula. Each link has its own participants and moves for its own reasons. A change at one stage does not pass through to the next in a fixed proportion.
Conceptual chain, not a fixed formula.
Why Mortgage Rates Are Higher Than Treasury Yields
A mortgage rate sits above the 10-year Treasury yield because a mortgage is a riskier, more complicated and more expensive asset to produce and hold. Fannie Mae's framework splits the gap into two broad parts.
Part 1: Treasury to MBS (the secondary spread)
This is the extra yield investors require to hold mortgage-backed securities instead of Treasuries. The reasons include:
- Prepayment risk. Borrowers can refinance or pay off their loans early, often when rates fall. That changes the timing of the cash flows MBS investors receive, and tends to return their money when reinvestment rates are less attractive. A Treasury has no such feature.
- Cash-flow uncertainty. Because prepayments depend on borrower behavior, an MBS investor cannot know exactly when principal will come back.
- Credit and guaranty structure. The underlying mortgages carry borrower credit risk. In agency mortgage-backed securities, guaranties protect investors from that borrower credit risk, while the cost of the guaranty remains part of mortgage economics.
- Market conditions. Demand for MBS, liquidity and the Fed's own holdings of MBS can widen or narrow this spread. Fannie Mae has pointed to Fed balance-sheet actions as a major factor in how this spread has changed.
Part 2: MBS to the borrower (the primary-secondary spread)
This is the gap between MBS yields and the rate a lender charges a borrower. Fannie Mae describes it as reflecting the industry's costs of originating a mortgage and lender margins. It can include:
- origination expenses;
- servicing fees;
- guaranty fees;
- operational costs; and
- lender margin or profit.
None of these components is constant. Lender capacity, competition and market volatility can all change how much of the gap lenders charge from one period to the next.
Primary-secondary spread
Conceptual, not a fixed formula. No numeric value is assigned to any single component here.
Current Snapshot: Three Rates, Three Different Measures
Three rates, three different measures
Current-rate snapshot
| Measure | Reading | What it represents | Source |
|---|---|---|---|
| Federal funds target range | 3.75%–4.00% | Short-term policy target, maintained at the October 28, 2026 FOMC meeting | Federal Reserve |
| 10-year Treasury yield | 4.98% | Long-term Treasury yield (constant maturity) on October 29, 2026 | Federal Reserve data via FRED (series DGS10) |
| Freddie Mac 30-year fixed (PMMS) | 7.24% | National weekly average for the week ending October 29, 2026 | Freddie Mac |
Swipe horizontally to view all columns →
Fed target maintained October 28, 2026. Treasury reading October 29, 2026. PMMS week ending October 29, 2026. These are three different rates measuring different things, not a deterministic Fed → Treasury → mortgage formula.
The three figures answer different questions: what overnight bank funding is targeted to cost, what the market charges the federal government to borrow for 10 years, and what rates averaged on a defined set of 30-year fixed mortgage applications.
The 2.26-point gap
Comparing the October 29 PMMS release with the October 29 Treasury yield, the PMMS average was 2.26 percentage points above the 10-year Treasury yield (7.24% − 4.98%).
7.24% − 4.98% = 2.26 points
This is Metro Analytics arithmetic using two published rates.
It is not an official mortgage-spread measure, an MBS spread or a pricing formula. The gap combines both spreads described above, and it changes over time. It should not be read as a rule that a mortgage rate equals the 10-year yield plus a fixed amount.
The PMMS is a weekly average of applications received from Thursday through Wednesday, while the Treasury figure is a single day's reading, so the comparison lines up two differently constructed numbers.
Why Mortgage Rates Can Move Differently From the Fed
Because mortgage rates are tied to long-term yields and MBS pricing, they respond to expectations, not only to the Fed's current target. That has three practical consequences.
Mortgage rates can move before the Fed acts
If markets come to expect lower policy rates in the future, long-term yields can fall in advance, and mortgage rates can ease before the Fed actually cuts. By the time a widely expected change is announced, much of it may already be reflected in market rates.
A Fed cut does not guarantee lower mortgage rates
A Fed cut is not an automatic mortgage-rate decline. Mortgage rates can hold steady or even rise after the Fed lowers its target if, at the same time, markets come to expect:
- more persistent inflation;
- stronger economic growth;
- higher future policy rates than previously expected;
- a larger term premium;
- wider MBS spreads; or
- other changes in long-term bond-market conditions.
The St. Louis Fed makes the same point: long-term mortgage rates could stay high or even rise when the Fed lowers short-term rates if inflation expectations rise or uncertainty is high. It also notes that mortgage rates usually do not move immediately in response to a change in the policy stance.
The current target is only one input
The same logic works in reverse for increases, and it applies when the Fed holds rates steady, as it did on October 28, 2026. A held target says little on its own about where mortgage rates will be the following week.
None of this is a prediction. The point is interpretive: mortgage markets price expectations, not just the current Fed target, so the direction of a Fed decision is not a reliable guide to the direction of mortgage rates.
What Freddie Mac PMMS Actually Measures
Freddie Mac's Primary Mortgage Market Survey is one of the most widely cited national mortgage-rate figures. The October 29, 2026 reading of 7.24% means something specific.
How the number is produced
- Application data, not a lender poll. Since November 2022, the PMMS has been based on data from Freddie Mac's Loan Product Advisor (LPA): mortgage rates collected from thousands of loan applications submitted to Freddie Mac by lenders nationwide. Before that change, Freddie Mac surveyed lenders directly.
- A defined loan universe. Freddie Mac calculates PMMS from purchase applications meeting its criteria, including conventional single-family loans within FHFA conforming loan limits. Freddie Mac describes the PMMS borrower profile as good/excellent credit, a 20% down payment, and an owner-occupied one-unit single-family purchase.
- A weekly window. Each week's figure covers applications received from 12:00 a.m. ET Thursday through 11:59 p.m. ET the following Wednesday.
- Weekly publication. The PMMS is published each Thursday at noon ET (on Wednesday when a U.S. holiday falls on Thursday).
- No fees or points. Freddie Mac stopped publishing average fees and points in November 2022, noting that lenders are not always required to provide them.
PMMS is
- national weekly average
- selected qualifying purchase applications
- based on Freddie Mac LPA data
- 30-year fixed rate under the current methodology
PMMS is not
- guaranteed personal quote
- every lender's rate
- every borrower's rate
- APR
- every mortgage product
- forecast
LPA application data · purchase applications · weekly Thursday–Wednesday window · published weekly
Why Your Mortgage Quote Can Differ From PMMS
The PMMS describes a national average for a specific kind of loan and borrower. An individual quote reflects both the market at that moment and the details of one loan.
Market-level factors
These affect rates for broad groups of borrowers at once:
- Treasury yields;
- MBS pricing;
- inflation and growth expectations;
- expectations for monetary policy;
- financial-market liquidity;
- mortgage-market spreads;
- the lender funding environment.
Borrower- and loan-level factors
The CFPB identifies several factors that can change the rate a particular borrower is offered:
- Credit score. In general, borrowers with higher credit scores receive lower rates.
- Down payment and loan-to-value. In general, a larger down payment means a lower rate.
- Loan amount and home price. Particularly small or particularly large loans can carry higher rates.
- Loan term. Shorter-term loans generally have lower rates than longer ones.
- Rate type. Fixed and adjustable rates are priced differently.
- Loan type. Rates can differ significantly across conventional, FHA, VA and USDA loans.
- Location. Many lenders offer slightly different rates depending on the state, and sometimes the county.
- Points and lender credits. Paying discount points can lower the rate in exchange for an upfront fee; lender credits can reduce closing costs in exchange for a higher rate.
Other details also matter, including whether a loan is conforming or jumbo, occupancy (primary residence, second home or investment property), property characteristics and when the rate is locked.
Lenders do not all price the same
The CFPB notes that different lenders can offer different loan products and rates. Two lenders can quote the same borrower different rates on the same day, which is one more reason a national average is not a personal quote.
Market-level factors
- Treasury yields
- MBS pricing
- inflation/growth expectations
- expected Fed policy
- liquidity
- mortgage-market spreads
- lender funding environment
Borrower / loan factors
- credit score
- down payment / LTV
- loan amount
- term
- fixed vs adjustable
- loan type
- location
- points / lender credits
- occupancy
- rate-lock timing
Mortgage Rate vs. APR
The interest rate and the APR are both percentages, but they measure different things.
Interest rate
The CFPB defines the interest rate as the cost you pay each year to borrow the money, expressed as a percentage rate. It is the rate applied to the loan balance and drives the principal-and-interest payment.
Annual percentage rate (APR)
The CFPB describes the APR as a broader measure of the cost of borrowing than the interest rate. It reflects the interest rate plus any points, mortgage broker fees and other charges paid to get the loan.
Because the APR folds in those costs, it is often different from the note rate. Two loans with the same interest rate can have different APRs if their fees differ.
The PMMS reports interest rates, not APRs. Since November 2022, Freddie Mac has not published average fees and points, so the PMMS figure should not be read as the total cost of borrowing.
Mortgage Rates vs. Housing Affordability
Mortgage rates are one input into housing affordability, not the whole of it. The rate converts a loan balance into a monthly payment, so a higher rate raises the payment on the same loan. But affordability also depends on:
- home prices;
- household income;
- the down payment;
- property taxes and insurance, where a measure includes them;
- financing terms beyond the rate itself.
A rate change can be offset or amplified by changes in any of these. Metro's Housing Affordability guide explains how the main affordability measures combine prices, income and rates, and why they can give different readings.
What Mortgage Rates Can and Cannot Tell You
Can help describe
- financing conditions
- broad borrowing-cost direction
- housing-finance environment
- one component of affordability
Cannot establish by themselves
- whether homes are affordable
- future home prices
- future sales
- housing demand
- future Fed policy
- future mortgage rates
- an individual's quote
- whether someone should buy/sell/refinance
- investment returns
Source facts: Freddie Mac / Federal Reserve / Fannie Mae / CFPB. Interpretation: Metro Analytics.
Rates and housing activity
Financing costs are relevant to homebuyer purchasing power, transaction activity and conditions for builders and buyers. But a given move in mortgage rates does not, by itself, determine what happens to prices, sales, inventory or construction. Those outcomes also depend on income, employment, supply, local conditions and much else, and an observed relationship between rates and any of them over a period is not proof that one caused the other.
How Housing Analysts Should Read Mortgage Rates
A mortgage-rate series is most informative when read alongside indicators that measure different parts of the housing market:
- Prices, income and affordability, which show how a given rate translates into the cost of buying a typical home.
- Sales activity. New-home sales and pending home sales record contracts; existing-home sales record closings. Each shows what transactions are doing under current financing conditions, without isolating the effect of rates.
- Inventory and construction, which describe supply.
- Employment and inflation, which shape both household finances and the bond-market expectations behind rates.
- Local market conditions, which a national average cannot capture. See Metro Analytics Markets for local context.
Three reading habits help:
- Check the measure. Know whether a figure is a weekly survey average, a daily market index or a lender quote, and what loans it covers.
- Keep periods aligned. Compare rates with other indicators for the same period, and label any mismatch.
- Separate fact from interpretation. A published rate is a source fact. A claim about why it moved, or what it will do to housing, is interpretation and should be supported by more than the rate itself.
Metro's approach is to rely on primary sources, show the methodology behind each figure and keep conclusions within what the evidence supports. See the Methodology for how each measure is defined and sourced.
The Takeaway
- The Fed influences, but does not set, mortgage rates. The federal funds rate is a short-term overnight target; the 30-year mortgage rate is shaped in long-term bond and mortgage markets.
- Long-term Treasury yields are the key benchmark. The 10-year Treasury is the usual reference, but it is a benchmark, not a formula, and other maturities matter too.
- Spreads fill the gap. Mortgage rates sit above Treasury yields because of MBS risks such as prepayment, and because of origination, servicing, guaranty and lender costs. Those spreads change over time.
- PMMS is an average, not a quote. Freddie Mac's 7.24% for the week ending October 29, 2026 describes a defined set of purchase applications, not every borrower's rate or APR.
- Mortgage rates are one signal. They describe financing conditions. They are not a forecast, and on their own they are not an investment signal.
The gap between a 3.75%–4.00% Fed target and a 7.24% mortgage average is not a contradiction. It reflects different rates doing different jobs in different markets, and reading them well starts with knowing what each one measures.
Sources
- Freddie Mac — Primary Mortgage Market Survey (PMMS)
- Federal Reserve — FOMC Statement, October 28, 2026
- Federal Reserve Bank of St. Louis — What Determines Mortgage Rates?
- Fannie Mae — What Determines the Rate on a 30-Year Mortgage?
- Consumer Financial Protection Bureau — What Is the Difference Between a Mortgage Interest Rate and an APR?
- Federal Reserve data via FRED — 10-Year Treasury Constant Maturity Rate (DGS10)
- Metro Analytics — Methodology
Editorial analysis for informational purposes only. Not investment, legal, or financial advice.